To ensure the normal operation and long service life of the generator set, excellent maintenance is important. So what preparations must we make in advance before maintenance and upkeep? We must conscientiously implement the technical specifications for maintenance and upkeep of the extruder screw compressor unit. Before starting maintenance, at least make the following preparations in advance:
1. Be sure to first disconnect the chassis power and place a label at the main power switch.
2. Turn off the shut-off valve leading to the gas supply system software to prevent air compression from flowing back to the repaired part. It is not necessary to use this product to protect the gas supply system software.
3. Open the manual vent valve, exhaust the working pressure in the system, and maintain the vent valve in an open position.
4. For water-cooled heat dissipation machines, be sure to turn off the water supply equipment and release the working pressure of the tap water pipeline.
5. Ensure that the compressor unit has cooled down to avoid burns and burns.
6. Clean the oil and water stains on the road surface to avoid falling.
When repairing, these four points must be noted:
1. There is no need to think that the machine is shut down, just because it needs to be repaired. During maintenance work, the fully automatic control system of the machine will run the compressor anytime and anywhere.
2.欠佳的维型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵护保养不但会直接影响发电机组的常规运作，并且还有可能危害实际操作工作人员的安全性。
2. Poor maintenance not only directly affects the normal operation of the generator set, but also may endanger the safety of actual operating personnel.
3. When the compressor is operating or under pressure, it is not necessary to disassemble nuts, oil plugs, and other parts.
4. Do not use flammable organic solvents, such as gasoline or gasoline for cleaning air filters or other components.